EPSOLE has been specialized in EPS industry for over 15 years, we aim to provide our esteemed customers from all over the world with full series of EPS products, including EPS raw materials, EPS machinery, EPS molds as well as EPS plant design, manufacturing, installation, training overseas after-sale technical support, etc. Hopefully, we could henceforth start a good cooperation in the future.
---Q345 high manganese steel welded combination;
---Treated by ball blasting, zinc coating;
Anti-septic performance improving
---Constructed & supported by 4 main rods;
Removed and replaced separately for maintenance
---All-round safe barrier.
Ensure no access to the working area
---Use a frame joint to anti machine vibration, keep the machine smooth;
---Add a layer of copper to the screw to reduce wear and increase the length of use;
---Using the advanced PID steam valve control system, the machine control is more accurate;
---The shock absorber pad at the bottom, reduce the vibration of the engine running;
---Use a detachable machine screw for easy access and replacement in case of problems
with the machine.
---EPS forming temperature: approx. 105 °C;
---Cooling water of 30-35 °C will be sprayed to the mould for 3-5 seconds to reduce the
temperature on the mould surface down to about 95 °C;
---Vacuum section. The water begins to evaporate as a result of pressure dropping;
---Water evaporation is a heat-absorbing process, the heat is taken away resulting in