EPS foam is a thermoplastic material. After heating and foaming, it contains 3-6 million independent closed bubbles per cubic meter of volume, and the volume of air contained is above 98%. This structure gives it many characteristics. Since the density can be as low as 10-30kg / m3, EPS is currently the lightest packaging material. Under high load conditions, this material will be bent. When shocked or dropped on the ground, it will cushion. And shock resistance; At the same time, because the air's thermal conductivity is very small and it is closed in the foam to prevent convection, EPS is a material with excellent thermal insulation properties

Products Photos








Expanded Polystyrene, also known as Expandable Polystyrene (EPS), has a small relative 

density (1.05g / cm3), low thermal conductivity, low water absorption, shock resistance, 

heat insulation, sound insulation, Moisture-proof, vibration-damping, excellent dielectric 

properties and other advantages, widely used in machinery and equipment, instruments, 

household electrical appliances, crafts and other shock-resistant packaging materials that 

are easy to damage valuable products and fast food packaging.



eps raw material catalog.png





New Building Materal  

Plastic Foam Flotation  

Decorating Material 

Full Mould Casting 

Protecting Material 

Filter Material






Packaging & Shipment




                    PACKING          WEIGHT/KG    20'FCL CAPACITY    40'FCL CAPACITY
       Paper Bag
    (Laminated Kraft Paper)
                  25             17.00MT              17.00MT
                 800             16.00MT              16.00MT
       Flecon Bag
      (Super Sack)
                 850             17.00MT              17.00MT
                 975             9.75MT              9.75MT
                1000             10.00MT              10.00MT
                1200             12.00MT              12.00MT



EPS Raw Material Storage



Ensure adequate ventilation in confined or confined spaces and local exhaust when possible. 

If the user generates dust, smoke or water vapor during operation, local exhaust ventilation 

should be used to keep the exposure below the specified exposure limit. If ventilation is not 

sufficient to effectively prevent the accumulation of vapours, fumes, water vapor and dust, 

appropriate respiratory protection must be provided. Wearing personal protective equipment 

such as chemical goggles, sealed gloves, work clothes and long sleeves, and respirators can 

reduce the possibility of exposure.


About Epsole


about epsole.jpg