About

Operation needing attention in cutting process

2021-09-09


  1. Switch on the switch in the power distribution cabinet

  2. Open the power lock on the operation panel, press the power button to supply power to CNC; turn on the power supply of dust collector and check whether the indicator light on the control box panel is normal

  3. CNC internal self diagnosis, confirm that no error message is displayed

  4. Close the switch in the servo cabinet and press the servo on button on the operation panel to supply power to the servo system. Turn the pulse knob on the control cabinet panel to the on position to backwash the filter cartridge and check whether the pulse is normal

  5. Make sure that the switches and buttons on the panel are flexible and reliable, and check whether the ash unloading gate valve is normal

  6. Test run the machine and confirm that the machine runs smoothly and all limit and emergency buttons are reliable


   

Prev: What are the maintenance problems of EPS machine?

Next: What are the consequences of poor quality EPS?

BACK