Straightening and breaking machine it belongs to a kind of straightening equipment. Straightening machine is one of the steel bar processing machine. Used for straightening and cutting steel bars below 14mm in diameter, cutting length can be customized according to customer requirements. Adjustable straight cutting stainless steel wire, aluminum wire, cold drawing wire, plastic coating steel wire, uniform incision, small error, good performance.
The straight wire machine has the characteristics of reasonable structure, convenient, safe and reliable operation, and is suitable for chicken cages, rabbit cages, building mesh pieces, all kinds of welding wires, sculled plate wire cutting and wire straightening for special-shaped mesh pieces.
The structure of the machine is to adjust the angle of the straight wire die by rotating the high speed rotor to achieve the effect of straightening, and then pass the wire wheel forward. After meeting the required size, the wire touches the positioning key and pushes the runway forward for 5mm. The upper punch presses the vertical cutting knife and immediately cuts it off. If the wire presses the vertical cutting knife and immediately cuts it off. If the wire presses the open bearing through the pressure plate on the vertical wire knife, the wire automatically falls to the bracket. If you want to change the length, move to positioning key.