About

How to deal with common failures of EPS machines?

2020-12-30

If you work in a humid environment, you can damage the electronic components of the device. If the humidity is too high, the circuit board will be shorted out. And the failure of power-off and the like is also easily caused. In operation, the EPS machine draws excessive particulate matter in the air and generates a large amount of dust. The dust will accumulate on the equipment and give a greater burden to the operation.

The power supply voltage fluctuation of the EPS machine is too large to cause a power failure. Long-time operation, long-time high-temperature work, the equipment is easy to burn, and the failure rate of the hard disk is high. The failure of the equipment can be caused by improper operation of the EPS machine, so the maintenance is important.


Prev: Expanded polystyrene board

Next: The drying room

BACK