Premise of EPS shape molding machine


Premise of EPS shape molding machine

1. The steam required for EPS foam molding machine must be saturated steam, with the pressure level of 0.6-0.8mpa. In the production process of EPS foam machinery, whether the steam is saturated or not is very important. If the steam pipe is too long, the steam pipe is too small, and the steam pressure of the boiler is not enough, it is easy to form water vapor, which affects the quality of EPS foam products.

2. The compressed air required for EPS foam molding machine must be purified, anhydrous and dust-free.

3. The raw material for EPS foam molding machine production is dry and powder free particles within the validity period. If the EPS raw material exceeds the service life, the foaming agent in the EPS raw material will volatilize to the air, which will not guarantee the correct rate of EPS raw material. If there is too much powder in the raw material, it will block the feeding port of the EPS foam plastic machine preformer barrel, and the air trough in the preformer barrel, so that the emitted particles are easy to agglomerate and the foam cloth is uniform and other defects.

We are Epsole technology Co,.Ltd,

We are Epsole technology Co,.Ltd, we specialized in manufacturing efficient EPS production line, EPS machine(EPS pre-expander machine ,EPS/EPP shape moulding machine ,EPS block moulding machine , EPS cutting machine)and EPS raw material

Know how to shorter your machine cycle time and better performance Please  contact us:info@epsole.com

Prev: Customer's evaluation of raw polystyrene beads

Next: Aluminum cutting machine in the work of a sudden power failure, how to do?