About

Problems needing attention in using EPS foam cutting machine

2020-06-15

Problems needing attention in using EPS foam cutting machine

With the application of EPS foam in recent years, as a EPS foam cutting machine, the EPS foam cutting machine has greatly improved its machine performance. But in the use of EPS foam cutting machine, we need to pay attention to some matters to avoid danger.

Before the EPS foam cutting machine is turned on, check whether there is air leakage in the machine line. Before shutdown, close the air valve and vent the remaining gas in the air circuit.

The EPS foam cutting machine uses the raw material for the flammable gas. When the machine is used, it is necessary to check the whole machine gas path regularly.

The gas source Department of the EPS foam cutting machine should keep away from the open fire and place the normal fire extinguishing device around the machine. In case of emergency, the emergency stop switch should be pressed immediately to avoid accidents.

The above is the EPS foam machine manufacturers and everyone to explain the use of EPS foam cutting machine should pay attention to matters, I hope to help you.



We are Epsole technology Co,.Ltd, we specialized in manufacturing efficient EPS production line, EPS machine(EPS pre-expander machine ,EPS/EPP shape moulding machine ,EPS block moulding machine , EPS cutting machine)and EPS raw material

Know how to shorter your machine cycle time and better performance Please  contact us:info@epsole.com


Prev: EPS Foam box market Prospects

Next: Using different steam heating methods to save factory cost

BACK