About

Mortar Rock Wool Composite Plate Equipment

2019-04-02

Operating Steps of Equipment for Mortar-rock Wool Composite Board and 

Equipment Mortar-rock Wool Composite Board:


1. Start the dry powder mixing system to invade the anti-cracking mortar into the 

storage tank, and the dry powder mortar feeding system will automatically feed into 

the mixing system.

2. Mortar mixing system is started, mortar and water are evenly mixed and stirred 

according to water ratio, butterfly valve is opened after mixing, mortar is flowed to 

mortar storage tank, then mortar storage tank is put into bottom composite material 

tank and upper composite material tank respectively. [After that, dry powder feeding 

system and mortar mixing system continue to work, so as to carry out the uninterrupted 

process of the working system.


eps board.jpg


3. Start the mortar composite platform, lay the plastic film and mesh cloth under the 

bottom mortar composite groove sequentially, and the working system runs.

4.Mortar covers the mesh cloth, and the rock wool sliver is arranged on the top of the 

mortar by the worker. After compaction and compaction, the rock wool sliver is arranged 

on the top of the mortar groove, the mesh cloth, the plastic film, the second compaction 

4, starting the longitudinal cutting sawpan and the transverse cutting sawpan. The 

composite rock wool mortar composite board equipment will be formed by longitudinal-

transverse automatic cutting. According to the system, the automatic measurement size 

will be set. Now semi-automatic operation.

5. The composite cutting board was transported to the air-drying shed by workers after 

discharging platform for air-drying treatment, and the double-sided composite mortar 

rock wool board was completed.


CONTACT INFORMATION

www.epsole.com

info@epsole.com

Prev: Specific steps and effects of installation and placement of firewall panels

Next: Cautions for Winter Safety Production of Light Wallboard

BACK